Universal AR-15 Fixture Complete Starter Kit

THIS KIT COMES WITH EVERYTHING NEEDED. SO LONG AS YOU OWN A GHOST GUNNER, NO ADDITIONAL PURCHASE IS REQUIRED TO UTILIZE THIS FIXTURE.

Expected New Order Ship dates:
GG3/GG3-S Version: 2-3 months
GG2 Version: 3-4 months

*The base milling codes for using with this fixture are included with your purchase and will be included with your order when it ships

Made in-house in the USA by GGD, made out of aluminum, and made to last
*Slaps the top of the Jig set* This baby right here will do it all

Main Description: This is for our big ballers out there or those that value their time and love a much simplified way of using their Ghost Gunner. Ideal for FFL's or those of us that love this hobby so much it's probably less like a hobby and more like an addiction! Comes with a base plate/fixture that drastically simplifies the process of running an 80% on the Ghost Gunner. It also allows for much more quickly swapping from one lower/job to another without the need to have to reprobe the lower. Instead the machines probes the base plate ONCE and then as long as you don't remove the base plate, crash the machine, or power down the Ghost Gunner you don't need to reprobe again meaning if you purchase a second set of the fixtures to have a lower on standby ready to go you could finish one lower and be able to pull it out and start a new one in under a minute!

Main features of our Universal Fixture:

Milling-
-Will work with virtually ANY 80% built off of an AR-15 pattern. This includes AR9's, AR45's etc. As well as lowers with large flared magwells or large integral trigger guards.
- No more offcenter pockets. Accurate placement of FCG pocket, safety selector hole as well as the trigger and hammer pin holes, due to referencing off of a consistent datum (front takedown pin) rather than the pistol grip pocket or inside of the magwell, which varies between manufacturers.
- No more misaligned safety selectors that sit at weird angles
- No more incorrect/inconsistent placement of hammer and trigger pins. With this fixture you can finally count on the Ghost Gunner to do all 80% machining required without worrying about incorrect placement of drilled and milled holes.
- No need for multiple different .dd files. Due to the previously mentioned accurate placement of features there is no need to have different codes for different manufacturers.
- Can handle whatever the Ghost Gunner can throw at it without fear of melting jigs or poor cut quality.
- Seamlessly mill the rear takedown pocket at the same time as the main fire control group pocket. Since there is no need for a bolt that goes through the rear takedown pin hole means the entire pocket, INCLUDING the rear takedown pocket, can be machined in one go without compromising the rigidity of the fixturing or issues with misalignment between rear takedown pocket and main pocket.
- Mill or skeletonize practically any area of the lower thanks to the completely open design of our fixture as well as its rock solid rigidity

Skeletonizing:
- Due to the vastly increased rigidity of this workholding solution, skeletonizing jobs can be done in a fraction of the time due to the elimination of vibration present in plastic fixturing.
- Completely open design leaves the entire receiver open to be skeletonized

Engraving:
- Will index much more accurately than current engraving jigs/fixtures
- No need to reprobe between engravings on the the same side (useful for FFL's doing the same logo or multiple serials one after the other)
- Completely open design will allow the entirety of the lower to be engraved without the fixture interfering while still being the most rigid and accurate fixturing for the AR-15, to date.
- More accurate placement of engraving due to referencing off of a consistent datum (front takedown pin) rather than the pistol grip pocket which varies between manufacturers.
- No more faded engravings
- Substantially reduced engraving times
- There is no need to use an end mill when engraving. Simply leave your engraving bit in if you are doing more than one engraving. Thanks to the base plate once it has been probed the very first time there is no need for anything other than an engraving bit when running engraving jobs.

- Virtually ELIMINATE the need for probing! No need to probe more than once after starting your machine until you shut it down again provided you don't move the base plate or the machine doesn't otherwise lose track of it's position. This means you can move right from milling the FCG/rear takedown pocket to drilling or milling the pin holes (that's right, milling, not drilling the pin holes) to engraving your lower immediately after milling the pin holes
- When combined with an added purchase of an additional set of the main fixtures will allow the user to have a new lower on standby ready to place in the machine and mill the moment the previous lower is completed. Disassemble the one you just removed and install it on another while the other lower is milling and you're ready for the next one when it completes. Rinse, lather, repeat.
- Potential to support other platforms as they are made high-volume capable to make it trivial to switch between different platforms such as P80, AR-10, 1911, etc with no need to reprobe or do any complicated setup.

Additional High Volume Fixture Sets: Buy an additional set of our High Volume Fixtures so you can have a lower on standby already assembled with the fixture to swap in when your currently being milled receiver finishes. doing it this way can allow you to have a new receiver being milled in under a minute from when the last one finished.

Additional High Volume Base Plates: The only real reason you would want an extra base plate is if you have multiple Ghost Gunners and want to maximize your throughput by having a base fixture on each of your machines to make use of our Universal Fixtures on multiple machines at once.